Translations:Zentrale Z21PG/16/en
Aus Digital Modellbahn
Version vom 21. Oktober 2021, 14:37 Uhr von FuzzyBot (Diskussion | Beiträge) (FuzzyBot verschob die Seite Translations:Zentrale/16/en nach Translations:Zentrale Z21PG/16/en, ohne dabei eine Weiterleitung anzulegen: Teil der übersetzbaren Seite „Zentrale“)
The Ethernet-Interface can be activated inside the sketch with "#define LAN". It provides the communication with the Z21 protocol library for cable devices connected to the Arduino W5100 Ethernet Shield. The used IP-Address is by default 192.168.0.111/24 and can be changed only over it's website (you need to activate the website by #define HTTPCONF"). You can also activate DHCP to receive a IP. To reset the IP to default you need to hold the power on/off switch while power plug in.
If you use the Arduino UNO with WiFi over Software Serial, you can't activate the Ethernet-Interface!